Nyckeladministration • Nyckelskåp • Nyckellagring • Nyckelsökning • Värdeskåp
Info: Din webbläsare accepterar inte cookies. För att kunna lägga lägga varor i din varukorg och köpa dem, så måste du aktivera hantering av cookies.

Elatec kortläsare moduler



Elatec reader/writer modules

Elatec multi protocol card reader modules offer a wide range of flexibility. The modules are avaialble as OEM PCB core boards without antenna (needs an external one) or as Complete reader with antenna built together. They are also available in a desktop housing with USB cable. One reader module can support both RS232 or USB depending on the cable type.

The favourite TWN4 family allows the users to read/write basically any kind of 125 KHz, 134.2 KHz and 13.56 MHz transponders. Being a combined multi-frequency reader, it can support both LF and HF in one module.

Nano OEM modules are built for integration into machines, handheld devices or any other equipments.It has compact dimensions, it is lightweight with low power cosumption.
  • TWN4 Multi-Frequency Card Readers
  • TWN3 Card reader family
  • Nano Boards
  • TCPconv
DatabladStäll en fråga om denna produkt

twn3family

TWN3 Card Reader Family

  • Supports single 125 KHz or 13.56 MHz
  • Supports also 134.2 KHz
  • Available as OEM bard or in Desktop housing
  • Mifare NFC, Legic NFC, Multi 125KHz, Multi ISO, HID Prox
  • Supports both USB and RS232 communication depending on the attached cable
  • Operation mode: USB keyboard, virtual COM port

twn3_multi_isotwn3-hid-prox



Nano modules

Nano LegicNanoMulti125

 

Nano module PCB boards have been designed for integration into machines, handheld computers or any other device. They are small in dimensions, great in flexibility and support several sleep modes for lower power consumption. Direct integration onto a PC board can be done easily. The can Read/Write different transponder types.

- Host communication: via serial TTL interface
- Ports: 4 user configurabe for I/O
- Beeper: supported.
- Prepared to be able to connect a SAM (Secure Access Module)

Available models:

  • Nano Module Legic 13.56 MHz
  • Nano Module Mifare 13.56 MHz
  • Nano Module Multi ISO 13.56 MHz
  • Nano Module Multi 125 and Multi 125LV 125 KHz

Multi 125 and Multi125LV models have 5 configuareble I/O ports and also external trigger for transponder operation is available.

 


 

 

 

 

 

 

Check what Reader you need for your transponder!

Click here to Download Transponder support matrix

elatec rfid

TWN4 multi-protocol ALL-IN-ONE Combined card Reader

  • Both 125 KHz/134 KHz and 13.56 MHz in one
  • Supports EM and Mifare in one the same time
  • 14443A, 14443B, 15693, NFC, Legic Prime, Legic Advant
  • Host communication: USB, RS232, RS485, ETH, CAN, WIE
  • Virtual COM port and USB keyboard emulation modes
  • SDK for Applications to be run in the reader
  • Firmware upgradable
  • 8 GPIO ports
  • Version P supports also HID Prox II, HID DuoProx, MicroProx, ISO Prox, HID ProxKey, etc.

The TWN4 card reader family can be ordered as OEM core module, a combi reader or as desktop version (with case). The core module needs external antenna.

 

twn4-all-in-onedesktop

  • TWN4 Mifare NFC
  • TWN4 Mifare NFC P (incl. HID 125 Khz)
  • TWN4 Mifare NFC PI (incl. HID 125 KHz)
  • TWN4 Legic NFC
  • TWN4 Legic NFC P (incl. HID 125 KHz)

    TWN4 all in one reader


TCPConv & TCPConv 2

TCPConv and TCPConv2 are tiny devices that make available to connect
USB or RS232 Card readers to LAN Network via RJ45 connector.
A typical application is when you need to control a card reader from
an extended distance.
Also a network printer can be connected to TCPconv. It runs embedded Linux and web-based configuration is available.

tcpconvTCPconv2

tcpconvscenario

Both devices have 2 LAN ports and both support TWN3 and TWN4 RFID reader/writers on USB or RS232, while TCPconv works as Switch and TCPConv2 works as an Ethernet Router.


TWN4 TECH TRACER KIT

This is a Card Analyzer and Development Kit. It can be used to determine card type and transponder technology used at the customer. Just read the card and you will see the exact card type and UID on the screen. Once the desired card type is tetermind, the TWN4 reader can be configured to read that specific transponder by changing firmware. An AppBlaster application is available in the kit to change the configuration and firmware (SDK development kit).

TWN4 TechTracer Kit

..........................................................................................................................................................................................................

Andra produkter: Nyckelförvaring, Säkerhet

+ [ IQ40 Nyckelförvaringskabinett ] + [ IQ80 Nyckelförvaring i väggskåp ]
+ [ IQ160 Nyckelförvaringskabinett ] + [ IQ160 Nyckelförvaring i väggskåp ]
+ [ IQ400 Nyckelsäkerhetsskåp ] + [ IQ80 Nyckelförvaring i frekvensomriktarskåpet ]
+ [ IQ50 Nyckelförvaring i Väggskåp ] + [ IQ Boxprodukter ]

 

 

 

 

 

..........................................................................................................................................................................................................

Uttrycken

RFID Nyckeladministrationssystem - RFID baserat Nyckelstyrsystem - Nyckel sökning - RFID nyckelspårning - Nyckelkabinett - Nyckelskåp - Nyckelsäkerhet - Nyckelkontroll - Nyckellagring - Nyckelskåp för bilbranschen - Automatiserad nyckelförvaring - Nyckelsäkerhetssystem - Automatisk nyckelkontroll - RFID baserade box och nyckelskåp